Electronic Hardware & Manufacturing
From IoT devices to electronics manufacturing services (EMS): a hardware portfolio delivered in the Karel and MANAS partnerships, backed by the capacity of one of Türkiye's largest electronics manufacturing centers — from design to mass production.
- 6 product families
- 2 manufacturing partners
- Design → prototype → mass production
- Domestic production & local service
15M boards/year capacity
IPC-standard SMD and manual assembly · Karel and MANAS
Why the electronic hardware & manufacturing portfolio
Configure, don't program
Beacons and gateways deploy from a PC GUI and web portal with zero firmware work.
Built for years, not quarters
Multi-year beacon batteries, ~15-year shelf labels, and −40/+85 °C operating ranges.
Own your data chain
Local servers, open APIs, and MQTT/UDP: every device feeds your systems, not someone else’s cloud.
Factory-backed
The partners who build these devices in volume stand behind every rollout, from spare parts to EMS.
Beacon BC-100 — Bluetooth LE Positioning Device
An ultra-low-power beacon you configure, not program.
Built for location tracking, asset monitoring, and proximity applications, BC-100 is configured without software programming — a PC GUI sets the broadcast format and it runs for years on a coin cell. The same configure-and-use approach spans eight form factors, from wristband and card to hard hat.
- Bluetooth LE 5.3 with advanced privacy mode and Resolvable Private Addresses
- iBeacon, Eddystone, and AltBeacon support across three independent advertising payloads
- Continuous or event-triggered broadcast, configured via the NanoBeacon Config PC GUI — no firmware programming
- Programmable output power up to +5 dBm; optional MedRadio band
- Sub-microwatt consumption, multi-year battery life (<650 nA in sleep)
- AES-128 authentication and clone prevention across all eight form factors
Delivered in partnership with Karel
BC-100
- Form factor
- Base beacon
- Status
- Series production
BC-100-WB
- Form factor
- Wristband
- Status
- Series production
BC-100-W
- Form factor
- Watch
- Status
- Engineering sample
BC-100-C
- Form factor
- Card
- Status
- Series production
BC-100-NB
- Form factor
- Name badge
- Status
- Engineering sample
BC-100-LL
- Form factor
- Long-life
- Status
- Series production
BC-100-HH
- Form factor
- Hard hat
- Status
- Engineering sample
BC-100-KID
- Form factor
- Child wristband
- Status
- Engineering sample
Bluetooth Gateway
Collects every beacon in range and streams it into your network.
A RISC-V-powered wireless gateway that runs Wi-Fi and Bluetooth simultaneously: it scans surrounding beacons, filters them by RSSI, MAC, and content, timestamps each reading, and forwards structured data to your central system. Paired with BC-100, it forms one end-to-end tracking system.
- 32-bit RISC-V processor at up to 160 MHz with simultaneous Wi-Fi/Bluetooth coexistence
- 802.11 b/g/n Wi-Fi at up to 150 Mbps; Station/SoftAP modes
- Bluetooth 5 LE & Mesh at up to +20 dBm
- UDP or MQTT (TLS) transport in JSON or Protobuf, plus a configurable heartbeat health signal
- OTA updates with digital signature and dual-partition rollback
- Web management portal for configuration and live system monitoring
Delivered in partnership with Karel
IBG-1000
- Distinguishing feature
- Base gateway
- Status
- Series production
IBG-1000-LTE
- Distinguishing feature
- LTE cellular connectivity
- Status
- Series production
IBG-1000-GPS
- Distinguishing feature
- GPS location
- Status
- Engineering sample
IBG-1001-PRO
- Distinguishing feature
- Pro edition
- Status
- Series production
IBG-1000-WIFI
- Distinguishing feature
- Wi-Fi-focused
- Status
- Engineering sample
IBG-1000-ETH
- Distinguishing feature
- Ethernet port
- Status
- Series production
IBG-1000-ETH-PRO
- Distinguishing feature
- Ethernet Pro
- Status
- Engineering sample
IBG-1002-PRO
- Distinguishing feature
- Pro edition
- Status
- Engineering sample
Together, BC-100 and IBG-1000 form the field layer behind Solent’s XPoint tracking platform.
ITC Series — Industrial Climate Tracking
Seconds between a threshold breach and the right person's phone ringing.
Continuous temperature/humidity monitoring and multi-channel alarms for cold rooms, server rooms, and critical cabinets — warnings fire within seconds against food spoilage, hardware failure, and power cuts. A six-device family covers every field condition, from Wi-Fi monitors with battery backup to a BLE gateway aggregating 50+ sensors, behind a rule-based alarm engine that kills false alarms.
- WhatsApp, Telegram, e-mail, and SMS instant notifications
- Automatic voice call on critical thresholds
- Power-cut detection; uninterrupted operation on the internal 3000 mAh battery
- Single-panel central management of all locations
- 48-hour to 30-day local retention syncs losslessly after outages
- AES-128/256, RSA, and HMAC encryption with role-based access
ITC-B3000U
- Type
- Monitoring device (Battery/Mid)
- Connectivity
- Wi-Fi 2.4 GHz
- Power
- 3000 mAh + 5V 1A UPS
- Highlight
- Uninterrupted power + outage detection
ITC-G6000L
- Type
- Gateway (Pro)
- Connectivity
- GSM/LTE + Wi-Fi
- Power
- 6000 mAh + UPS, voltage monitoring
- Highlight
- Cellular coverage when Wi-Fi is out
ITC-W1000E
- Type
- Monitoring device (Standard/Eco)
- Connectivity
- Wi-Fi 2.4 GHz
- Power
- Mains-powered (no battery)
- Highlight
- Cost-focused, mains-powered
ITC-GB4000L
- Type
- BLE gateway (Pro)
- Connectivity
- GSM/LTE + BLE (NB-IoT 4G)
- Power
- 3000 mAh + 5V 2A UPS
- Highlight
- 50+ sensors, on-device LCD, 30-day buffer
ITC-S200B
- Type
- BLE sensor (Sense/Air)
- Connectivity
- BLE 5.0
- Power
- Li-SOCl2 battery, 2+ yr
- Highlight
- ±0.1 °C accuracy, tamper detection, 48-hr local buffer
ITC-SM100
- Type
- Sensor module (external probe)
- Connectivity
- Wired to host device
- Power
- Powered by host device
- Highlight
- 3-in-1 probe, −40/+85 °C
E-Shelf Label (ESL) & IoT Gateway
Paper prices out; instant, error-free updates in — as a monthly service.
A domestically produced electronic shelf label and IoT gateway system that moves retail and logistics from paper to digital. Price and product information updates centrally, instantly, and without errors — and instead of selling hardware, the system is offered as a monthly per-label service (HaaS/leasing), backed by an end-to-end domestic production line.
- 2.66" 3-color e-ink display; ARM Cortex-M4F (nRF52840) processor architecture
- ~15-year battery life (3–10 years in imported equivalents)
- 400 m open-field gateway range (Skyworks FEM) — only 10 gateways for a 2,000 m² store
- Ethernet + Wi-Fi on the gateway for uninterrupted connectivity and stability
- Local server and open API for ERP/POS integration — data sovereignty
- 3–5-day lead time with local service (8–12 weeks for imports)
- 30–40% cost advantage from domestic production; 80% opex reduction with ESL
- HaaS/leasing model: customers never buy hardware, they pay a monthly service fee
RFID & Electronic Labeling
Every asset identified, counted, and traced — without touching it.
RFID-based identification and electronic-label (e-label) solutions for asset tracking, inventory management, and access control. The portfolio, delivered in the Karel partnership, gives production, logistics, retail, and security operations end-to-end traceability of products and assets.
- UHF/HF RFID tags, readers, and antenna infrastructure
- Asset and inventory tracking; bulk, contactless counting
- Integration with access control, plate recognition, and electronic security systems
- E-label applications and data integration with enterprise software (ERP/WMS)
Delivered in partnership with Karel
Electronics Manufacturing Services (EMS)
The line that built Türkiye's first domestic POS device can build yours.
IPC-standard SMD and manual assembly lines take a design from first prototype to mass production. The infrastructure that produced Türkiye's first domestic POS device manufactures today for leading white-goods and defense companies; MANAS adds a 15,000 m² facility with an R&D center spanning AI, digital twin, additive manufacturing, and nanotechnology.
- 15 million electronic boards per year of production capacity (Karel)
- 32,000 m² production facility; references include Arçelik, Beko, Vestel, and Aselsan
- IPC-standard SMD / manual assembly (MANAS: 15,000 m² facility, R&D center)
- R&D areas: AI, digital twin, additive manufacturing, nanotechnology
Delivered in partnership with Karel and MANAS.
Who it serves
- Retail & logistics operators
- Cold-chain, pharma & food quality teams
- OEMs & product companies (EMS)
- RTLS / IoT integrators
Electronic hardware & manufacturing figures
Boards/year EMS capacity
ESL/year production capacity
Shelf-label battery life
Open-field gateway range
Delivered in partnership with Karel and MANAS.
